MT 300 S / SHQ (Holo & MTGLOSS)
MT300 S is a high quality transfer film intended to give a plain metallic (and non-metallic for The MT GLOSS one) glossy effect on leather's surface. This product which is available in different colours has an excellent adhesion and high colour brilliance.
FIELDS OF APPLICATION
Thanks to a very high quality of adhesive, the MT300 S can be applied on a large range of materials:
- Leathers and synthetic leathers
- PU and PVC coated fabrics
PROCESSING INFORMATION
On press with warm plate (Mostardini or similar) or with warm cylinder. We recommend you before transferring the MT300 S to spray on the skin a PU or an acrylic adhesive resin. Conversely to the most of PU resins, acrylic resins are "self crosslinkling". It means you must transfer the paper a short time after spraying skins before the resin lose its thermoplastic characteristics.
| Temperature | 95°/110° | Celsius |
| 203° | Fahrenheit | |
| Pressure | 20/30 | kg/cm2 |
| Time | 4/5 | seconds |
AVAILABILITY / FORM OF DELIVERY
| Roll length | 500 | meters | 100 | meters |
| 547 | yards | 109.4 | yards | |
| Carrier film thickness standard: 36μm (microns) | ||||
| Width | standard:1580mm | Standard: 800 mm | ||
| non-standard: 1000mm | ||||
| Colour | more than 48 colours | |||
RECOMMENDATIONS
In case of using this product onto PVC surface, please be careful with plastificant migration.
Anyone knows that leather can be affected by tanning agents or special finishing treatments. In each case we recommend you to make many trials in your own conditions according to your leather and your equipment .
:+33(0)5.56.89.23.00
:+33(0)5.56.75.52.64